| fis write | ||
|---|---|---|
 | 225.3. Flash Image System (FIS) |  |
Name
fis write — Write flash area
Synopsis
fis write {-b mem_address} {-l length} {-f flash_address}
Arguments
| Name | Type | Description | Default |
|---|---|---|---|
mem_address
| Number | Address of data to be written to flash. | |
length
| Number | Length of data to be writtem. | |
flash_address
| Number | Address of flash to write to. |
Description
This command is used to write data from memory to flash. There is no cross-checking to ensure that the area being written to does not correspond to an existing image.
Examples
Write an area of data to the flash
RedBoot>fis write -b 0x0606f000 -l 0x1000 -f 0x00020000* CAUTION * about to program FLASH at 0x00020000..0x0002ffff from 0x0606f000 - continue (y/n)?y... Erase from 0x00020000-0x00030000: . ... Program from 0x0606f000-0x0607f000 at 0x00020000: .
| |  | |
| fis read |  | fs info |
| 2024-03-18 | eCosPro Non-Commercial Public License |