Test Programs — Details
The STM32X0G platform HAL contains some test programs which allow various aspects of the board to be tested.
This program tests the ADC driver for the STM32. The only device
connected to the ADC on the board is the potentiometer connected
to ADC3 logical channel 7. Therefore this test primarily tests
that. However, in addition it also report the values of the
temperature sensor, Vrefint and Vbat inputs that are sourced
on-chip. The option
be enabled to run this test since it needs human interaction.
|2021-09-02||eCosPro Non-Commercial Public License|