| Debugging with GDB: Print Settings |
|---|
Next: Pretty Printing, Previous: Auto Display, Up: Data [Contents][Index]
GDB provides the following ways to control how arrays, structures, and symbols are printed.
These settings are useful for debugging programs in any language:
set print address
set print address on
GDB prints memory addresses showing the location of stack
traces, structure values, pointer values, breakpoints, and so forth,
even when it also displays the contents of those addresses. The default
is on. For example, this is what a stack frame display looks like with
set print address on:
(gdb) f
#0 set_quotes (lq=0x34c78 "<<", rq=0x34c88 ">>")
at input.c:530
530 if (lquote != def_lquote)
set print address off
Do not print addresses when displaying their contents. For example,
this is the same stack frame displayed with set print address off:
(gdb) set print addr off (gdb) f #0 set_quotes (lq="<<", rq=">>") at input.c:530 530 if (lquote != def_lquote)
You can use ‘set print address off’ to eliminate all machine
dependent displays from the GDB interface. For example, with
print address off, you should get the same text for backtraces on
all machines—whether or not they involve pointer arguments.
show print address
Show whether or not addresses are to be printed.
When GDB prints a symbolic address, it normally prints the
closest earlier symbol plus an offset. If that symbol does not uniquely
identify the address (for example, it is a name whose scope is a single
source file), you may need to clarify. One way to do this is with
info line, for example ‘info line *0x4537’. Alternately,
you can set GDB to print the source file and line number when
it prints a symbolic address:
set print symbol-filename on
Tell GDB to print the source file name and line number of a symbol in the symbolic form of an address.
set print symbol-filename off
Do not print source file name and line number of a symbol. This is the default.
show print symbol-filename
Show whether or not GDB will print the source file name and line number of a symbol in the symbolic form of an address.
Another situation where it is helpful to show symbol filenames and line numbers is when disassembling code; GDB shows you the line number and source file that corresponds to each instruction.
Also, you may wish to see the symbolic form only if the address being printed is reasonably close to the closest earlier symbol:
set print max-symbolic-offset max-offset
set print max-symbolic-offset unlimited
Tell GDB to only display the symbolic form of an address if the
offset between the closest earlier symbol and the address is less than
max-offset. The default is unlimited, which tells GDB
to always print the symbolic form of an address if any symbol precedes
it. Zero is equivalent to unlimited.
show print max-symbolic-offset
Ask how large the maximum offset is that GDB prints in a symbolic address.
If you have a pointer and you are not sure where it points, try
‘set print symbol-filename on’. Then you can determine the name
and source file location of the variable where it points, using
‘p/a pointer
’. This interprets the address in symbolic form.
For example, here GDB shows that a variable ptt points
at another variable t, defined in hi2.c:
(gdb) set print symbol-filename on (gdb) p/a ptt $4 = 0xe008 <t in hi2.c>
Warning: For pointers that point to a local variable, ‘p/a’ does not show the symbol name and filename of the referent, even with the appropriate
set printoptions turned on.
You can also enable ‘/a’-like formatting all the time using ‘set print symbol on’:
set print symbol on
Tell GDB to print the symbol corresponding to an address, if one exists.
set print symbol off
Tell GDB not to print the symbol corresponding to an address. In this mode, GDB will still print the symbol corresponding to pointers to functions. This is the default.
show print symbol
Show whether GDB will display the symbol corresponding to an address.
Other settings control how different kinds of objects are printed:
set print array
set print array on
Pretty print arrays. This format is more convenient to read, but uses more space. The default is off.
set print array off
Return to compressed format for arrays.
show print array
Show whether compressed or pretty format is selected for displaying arrays.
set print array-indexes
set print array-indexes on
Print the index of each element when displaying arrays. May be more convenient to locate a given element in the array or quickly find the index of a given element in that printed array. The default is off.
set print array-indexes off
Stop printing element indexes when displaying arrays.
show print array-indexes
Show whether the index of each element is printed when displaying arrays.
set print elements number-of-elements
set print elements unlimited
Set a limit on how many elements of an array GDB will print.
If GDB is printing a large array, it stops printing after it has
printed the number of elements set by the set print elements command.
This limit also applies to the display of strings.
When GDB starts, this limit is set to 200.
Setting number-of-elements to unlimited or zero means
that the number of elements to print is unlimited.
show print elements
Display the number of elements of a large array that GDB will print. If the number is 0, then the printing is unlimited.
set print frame-arguments value
This command allows to control how the values of arguments are printed when the debugger prints a frame (see Frames). The possible values are:
all
The values of all arguments are printed.
scalars
Print the value of an argument only if it is a scalar. The value of more
complex arguments such as arrays, structures, unions, etc, is replaced
by …. This is the default. Here is an example where
only scalar arguments are shown:
#1 0x08048361 in call_me (i=3, s=…, ss=0xbf8d508c, u=…, e=green) at frame-args.c:23
none
None of the argument values are printed. Instead, the value of each argument
is replaced by …. In this case, the example above now becomes:
#1 0x08048361 in call_me (i=…, s=…, ss=…, u=…, e=…) at frame-args.c:23
By default, only scalar arguments are printed. This command can be used
to configure the debugger to print the value of all arguments, regardless
of their type. However, it is often advantageous to not print the value
of more complex parameters. For instance, it reduces the amount of
information printed in each frame, making the backtrace more readable.
Also, it improves performance when displaying Ada frames, because
the computation of large arguments can sometimes be CPU-intensive,
especially in large applications. Setting print frame-arguments
to scalars (the default) or none avoids this computation,
thus speeding up the display of each Ada frame.
show print frame-arguments
Show how the value of arguments should be displayed when printing a frame.
set print raw frame-arguments on
Print frame arguments in raw, non pretty-printed, form.
set print raw frame-arguments off
Print frame arguments in pretty-printed form, if there is a pretty-printer for the value (see Pretty Printing), otherwise print the value in raw form. This is the default.
show print raw frame-arguments
Show whether to print frame arguments in raw form.
set print entry-values value
Set printing of frame argument values at function entry. In some cases GDB can determine the value of function argument which was passed by the function caller, even if the value was modified inside the called function and therefore is different. With optimized code, the current value could be unavailable, but the entry value may still be known.
The default value is default (see below for its description). Older
GDB behaved as with the setting no. Compilers not supporting
this feature will behave in the default setting the same way as with the
no setting.
This functionality is currently supported only by DWARF 2 debugging format and the compiler has to produce ‘DW_TAG_call_site’ tags. With GCC, you need to specify -O -g during compilation, to get this information.
The value parameter can be one of the following:
no
Print only actual parameter values, never print values from function entry point.
#0 equal (val=5) #0 different (val=6) #0 lost (val=<optimized out>) #0 born (val=10) #0 invalid (val=<optimized out>)
only
Print only parameter values from function entry point. The actual parameter values are never printed.
#0 equal (val@entry=5) #0 different (val@entry=5) #0 lost (val@entry=5) #0 born (val@entry=<optimized out>) #0 invalid (val@entry=<optimized out>)
preferred
Print only parameter values from function entry point. If value from function entry point is not known while the actual value is known, print the actual value for such parameter.
#0 equal (val@entry=5) #0 different (val@entry=5) #0 lost (val@entry=5) #0 born (val=10) #0 invalid (val@entry=<optimized out>)
if-needed
Print actual parameter values. If actual parameter value is not known while value from function entry point is known, print the entry point value for such parameter.
#0 equal (val=5) #0 different (val=6) #0 lost (val@entry=5) #0 born (val=10) #0 invalid (val=<optimized out>)
both
Always print both the actual parameter value and its value from function entry point, even if values of one or both are not available due to compiler optimizations.
#0 equal (val=5, val@entry=5) #0 different (val=6, val@entry=5) #0 lost (val=<optimized out>, val@entry=5) #0 born (val=10, val@entry=<optimized out>) #0 invalid (val=<optimized out>, val@entry=<optimized out>)
compact
Print the actual parameter value if it is known and also its value from
function entry point if it is known. If neither is known, print for the actual
value <optimized out>. If not in MI mode (see GDB/MI) and if both
values are known and identical, print the shortened
param=param@entry=VALUE notation.
#0 equal (val=val@entry=5) #0 different (val=6, val@entry=5) #0 lost (val@entry=5) #0 born (val=10) #0 invalid (val=<optimized out>)
default
Always print the actual parameter value. Print also its value from function
entry point, but only if it is known. If not in MI mode (see GDB/MI) and
if both values are known and identical, print the shortened
param=param@entry=VALUE notation.
#0 equal (val=val@entry=5) #0 different (val=6, val@entry=5) #0 lost (val=<optimized out>, val@entry=5) #0 born (val=10) #0 invalid (val=<optimized out>)
For analysis messages on possible failures of frame argument values at function entry resolution see set debug entry-values.
show print entry-values
Show the method being used for printing of frame argument values at function entry.
set print repeats number-of-repeats
set print repeats unlimited
Set the threshold for suppressing display of repeated array
elements. When the number of consecutive identical elements of an
array exceeds the threshold, GDB prints the string
"<repeats n times>", where n is the number of
identical repetitions, instead of displaying the identical elements
themselves. Setting the threshold to unlimited or zero will
cause all elements to be individually printed. The default threshold
is 10.
show print repeats
Display the current threshold for printing repeated identical elements.
set print null-stop
Cause GDB to stop printing the characters of an array when the first NULL is encountered. This is useful when large arrays actually contain only short strings. The default is off.
show print null-stop
Show whether GDB stops printing an array on the first NULL character.
set print pretty on
Cause GDB to print structures in an indented format with one member per line, like this:
$1 = {
next = 0x0,
flags = {
sweet = 1,
sour = 1
},
meat = 0x54 "Pork"
}
set print pretty off
Cause GDB to print structures in a compact format, like this:
$1 = {next = 0x0, flags = {sweet = 1, sour = 1}, \
meat = 0x54 "Pork"}
This is the default format.
show print pretty
Show which format GDB is using to print structures.
set print sevenbit-strings on
Print using only seven-bit characters; if this option is set,
GDB displays any eight-bit characters (in strings or
character values) using the notation \
nnn. This setting is
best if you are working in English (ASCII) and you use the
high-order bit of characters as a marker or “meta” bit.
set print sevenbit-strings off
Print full eight-bit characters. This allows the use of more international character sets, and is the default.
show print sevenbit-strings
Show whether or not GDB is printing only seven-bit characters.
set print union on
Tell GDB to print unions which are contained in structures and other unions. This is the default setting.
set print union off
Tell GDB not to print unions which are contained in
structures and other unions. GDB will print "{...}"
instead.
show print union
Ask GDB whether or not it will print unions which are contained in structures and other unions.
For example, given the declarations
typedef enum {Tree, Bug} Species;
typedef enum {Big_tree, Acorn, Seedling} Tree_forms;
typedef enum {Caterpillar, Cocoon, Butterfly}
Bug_forms;
struct thing {
Species it;
union {
Tree_forms tree;
Bug_forms bug;
} form;
};
struct thing foo = {Tree, {Acorn}};
with set print union on in effect ‘p foo’ would print
$1 = {it = Tree, form = {tree = Acorn, bug = Cocoon}}
and with set print union off in effect it would print
$1 = {it = Tree, form = {...}}
set print union affects programs written in C-like languages
and in Pascal.
These settings are of interest when debugging C++ programs:
set print demangle
set print demangle on
Print C++ names in their source form rather than in the encoded (“mangled”) form passed to the assembler and linker for type-safe linkage. The default is on.
show print demangle
Show whether C++ names are printed in mangled or demangled form.
set print asm-demangle
set print asm-demangle on
Print C++ names in their source form rather than their mangled form, even in assembler code printouts such as instruction disassemblies. The default is off.
show print asm-demangle
Show whether C++ names in assembly listings are printed in mangled or demangled form.
set demangle-style style
Choose among several encoding schemes used by different compilers to represent C++ names. The choices for style are currently:
auto
Allow GDB to choose a decoding style by inspecting your program. This is the default.
gnu
Decode based on the GNU C++ compiler (g++) encoding algorithm.
hp
Decode based on the HP ANSI C++ (aCC) encoding algorithm.
lucid
Decode based on the Lucid C++ compiler (lcc) encoding algorithm.
arm
Decode using the algorithm in the C++ Annotated Reference Manual.
Warning: this setting alone is not sufficient to allow
debugging cfront-generated executables. GDB would
require further enhancement to permit that.
If you omit style, you will see a list of possible formats.
show demangle-style
Display the encoding style currently in use for decoding C++ symbols.
set print object
set print object on
When displaying a pointer to an object, identify the actual (derived) type of the object rather than the declared type, using the virtual function table. Note that the virtual function table is required—this feature can only work for objects that have run-time type identification; a single virtual method in the object’s declared type is sufficient. Note that this setting is also taken into account when working with variable objects via MI (see GDB/MI).
set print object off
Display only the declared type of objects, without reference to the virtual function table. This is the default setting.
show print object
Show whether actual, or declared, object types are displayed.
set print static-members
set print static-members on
Print static members when displaying a C++ object. The default is on.
set print static-members off
Do not print static members when displaying a C++ object.
show print static-members
Show whether C++ static members are printed or not.
set print pascal_static-members
set print pascal_static-members on
Print static members when displaying a Pascal object. The default is on.
set print pascal_static-members off
Do not print static members when displaying a Pascal object.
show print pascal_static-members
Show whether Pascal static members are printed or not.
set print vtbl
set print vtbl on
Pretty print C++ virtual function tables. The default is off.
(The vtbl commands do not work on programs compiled with the HP
ANSI C++ compiler (aCC).)
set print vtbl off
Do not pretty print C++ virtual function tables.
show print vtbl
Show whether C++ virtual function tables are pretty printed, or not.
Next: Pretty Printing, Previous: Auto Display, Up: Data [Contents][Index]