15 readelf

readelf [-a|--all]
        [-h|--file-header]
        [-l|--program-headers|--segments]
        [-S|--section-headers|--sections]
        [-g|--section-groups]
        [-t|--section-details]
        [-e|--headers]
        [-s|--syms|--symbols]
        [--dyn-syms]
        [-n|--notes]
        [-r|--relocs]
        [-u|--unwind]
        [-d|--dynamic]
        [-V|--version-info]
        [-A|--arch-specific]
        [-D|--use-dynamic]
        [-x <number or name>|--hex-dump=<number or name>]
        [-p <number or name>|--string-dump=<number or name>]
        [-R <number or name>|--relocated-dump=<number or name>]
        [-z|--decompress]
        [-c|--archive-index]
        [-w[lLiaprmfFsoRtUuTgAckK]|
         --debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
        [--dwarf-depth=n
]
        [--dwarf-start=n
]
        [-I|--histogram]
        [-v|--version]
        [-W|--wide]
        [-H|--help]
        elffile…

readelf displays information about one or more ELF format object files. The options control what particular information to display.

elffile… are the object files to be examined. 32-bit and 64-bit ELF files are supported, as are archives containing ELF files.

This program performs a similar function to objdump but it goes into more detail and it exists independently of the BFD library, so if there is a bug in BFD then readelf will not be affected.

The long and short forms of options, shown here as alternatives, are equivalent. At least one option besides ‘-v’ or ‘-H’ must be given.

-a

--all

Equivalent to specifying --file-header, --program-headers, --sections, --symbols, --relocs, --dynamic, --notes, --version-info, --arch-specific, --unwind, --section-groups and --histogram.

Note - this option does not enable --use-dynamic itself, so if that option is not present on the command line then dynamic symbols and dynamic relocs will not be displayed.

-h

--file-header

Displays the information contained in the ELF header at the start of the file.

-l

--program-headers

--segments

Displays the information contained in the file’s segment headers, if it has any.

-S

--sections

--section-headers

Displays the information contained in the file’s section headers, if it has any.

-g

--section-groups

Displays the information contained in the file’s section groups, if it has any.

-t

--section-details

Displays the detailed section information. Implies -S.

-s

--symbols

--syms

Displays the entries in symbol table section of the file, if it has one. If a symbol has version information associated with it then this is displayed as well. The version string is displayed as a suffix to the symbol name, preceeded by an @ character. For example ‘foo@VER_1’. If the version is the default version to be used when resolving unversioned references to the symbol then it is displayed as a suffix preceeded by two @ characters. For example ‘foo@@VER_2’.

--dyn-syms

Displays the entries in dynamic symbol table section of the file, if it has one. The output format is the same as the format used by the --syms option.

-e

--headers

Display all the headers in the file. Equivalent to -h -l -S.

-n

--notes

Displays the contents of the NOTE segments and/or sections, if any.

-r

--relocs

Displays the contents of the file’s relocation section, if it has one.

-u

--unwind

Displays the contents of the file’s unwind section, if it has one. Only the unwind sections for IA64 ELF files, as well as ARM unwind tables (.ARM.exidx / .ARM.extab) are currently supported.

-d

--dynamic

Displays the contents of the file’s dynamic section, if it has one.

-V

--version-info

Displays the contents of the version sections in the file, it they exist.

-A

--arch-specific

Displays architecture-specific information in the file, if there is any.

-D

--use-dynamic

When displaying symbols, this option makes readelf use the symbol hash tables in the file’s dynamic section, rather than the symbol table sections.

When displaying relocations, this option makes readelf display the dynamic relocations rather than the static relocations.

-x <number or name>

--hex-dump=<number or name>

Displays the contents of the indicated section as a hexadecimal bytes. A number identifies a particular section by index in the section table; any other string identifies all sections with that name in the object file.

-R <number or name>

--relocated-dump=<number or name>

Displays the contents of the indicated section as a hexadecimal bytes. A number identifies a particular section by index in the section table; any other string identifies all sections with that name in the object file. The contents of the section will be relocated before they are displayed.

-p <number or name>

--string-dump=<number or name>

Displays the contents of the indicated section as printable strings. A number identifies a particular section by index in the section table; any other string identifies all sections with that name in the object file.

-z

--decompress

Requests that the section(s) being dumped by x, R or p options are decompressed before being displayed. If the section(s) are not compressed then they are displayed as is.

-c

--archive-index

Displays the file symbol index information contained in the header part of binary archives. Performs the same function as the t command to ar, but without using the BFD library. See ar.

-w[lLiaprmfFsoRtUuTgAckK]

--debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]

Displays the contents of the DWARF debug sections in the file, if any are present. Compressed debug sections are automatically decompressed (temporarily) before they are displayed. If one or more of the optional letters or words follows the switch then only those type(s) of data will be dumped. The letters and words refer to the following information:

a

=abbrev

Displays the contents of the ‘.debug_abbrev’ section.

A

=addr

Displays the contents of the ‘.debug_addr’ section.

c

=cu_index

Displays the contents of the ‘.debug_cu_index’ and/or ‘.debug_tu_index’ sections.

f

=frames

Display the raw contents of a ‘.debug_frame’ section.

F

=frame-interp

Display the interpreted contents of a ‘.debug_frame’ section.

g

=gdb_index

Displays the contents of the ‘.gdb_index’ and/or ‘.debug_names’ sections.

i

=info

Displays the contents of the ‘.debug_info’ section. Note: the output from this option can also be restricted by the use of the --dwarf-depth and --dwarf-start options.

k

=links

Displays the contents of the ‘.gnu_debuglink’ and/or ‘.gnu_debugaltlink’ sections. Also displays the link to a separate dwarf object file (dwo), if one is specified by the DW_AT_GNU_dwo_name or DW_AT_dwo_name attributes in the ‘.debug_info’ section.

K

=follow-links

Display the contents of any selected debug sections that are found in a linked, separate debug info file. This can result in multiple versions of the same debug section being displayed if both the main file and the separate debug info file contain sections with the same name.

In addition, when displaying DWARF attributes, if a form is found that references the separate debug info file, then the referenced contents will also be displayed.

l

=rawline

Displays the contents of the ‘.debug_line’ section in a raw format.

L

=decodedline

Displays the interpreted contents of the ‘.debug_line’ section.

m

=macro

Displays the contents of the ‘.debug_macro’ and/or ‘.debug_macinfo’ sections.

o

=loc

Displays the contents of the ‘.debug_loc’ and/or ‘.debug_loclists’ sections.

p

=pubnames

Displays the contents of the ‘.debug_pubnames’ and/or ‘.debug_gnu_pubnames’ sections.

r

=aranges

Displays the contents of the ‘.debug_aranges’ section.

R

=Ranges

Displays the contents of the ‘.debug_ranges’ and/or ‘.debug_rnglists’ sections.

s

=str

Displays the contents of the ‘.debug_str’, ‘.debug_line_str’ and/or ‘.debug_str_offsets’ sections.

t

=pubtype

Displays the contents of the ‘.debug_pubtypes’ and/or ‘.debug_gnu_pubtypes’ sections.

T

=trace_aranges

Displays the contents of the ‘.trace_aranges’ section.

u

=trace_abbrev

Displays the contents of the ‘.trace_abbrev’ section.

U

=trace_info

Displays the contents of the ‘.trace_info’ section.

Note: displaying the contents of ‘.debug_static_funcs’, ‘.debug_static_vars’ and ‘debug_weaknames’ sections is not currently supported.

--dwarf-depth=n

Limit the dump of the .debug_info section to n children. This is only useful with --debug-dump=info. The default is to print all DIEs; the special value 0 for n will also have this effect.

With a non-zero value for n, DIEs at or deeper than n levels will not be printed. The range for n is zero-based.

--dwarf-start=n

Print only DIEs beginning with the DIE numbered n. This is only useful with --debug-dump=info.

If specified, this option will suppress printing of any header information and all DIEs before the DIE numbered n. Only siblings and children of the specified DIE will be printed.

This can be used in conjunction with --dwarf-depth.

-I

--histogram

Display a histogram of bucket list lengths when displaying the contents of the symbol tables.

-v

--version

Display the version number of readelf.

-W

--wide

Don’t break output lines to fit into 80 columns. By default readelf breaks section header and segment listing lines for 64-bit ELF files, so that they fit into 80 columns. This option causes readelf to print each section header resp. each segment one a single line, which is far more readable on terminals wider than 80 columns.

-H

--help

Display the command line options understood by readelf.